Videos
for Bulldog Winch
Help Articles
for Bulldog Winch
Expert Answers
for Bulldog Winch
Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
view full answer...The weight is 54 lbs for the Superwinch S7500 Trailer Winch #SW1475201.
view full answer...I called my contacts at our winch suppliers to see if there were any winches available that perform as you requested. I was unable to find a winch that had an auto shutoff when the winch senses a trailer door is closed since winches constantly feel…
view full answer...Yes, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles part #BDW20011 will work with the Warn Electric Winch M12 as they both use the same industry standard winch mounting hole spacing which is 4-1/2" wide x 10 long.
view full answer...I recommend using a Winch #SW39GR with the Hitch Mount #BDW20011. This way you only need a 2" receiver which is typically already on the rear of most trucks and are available for the front. For your tilt trailer you can weld on a Receiver…
view full answer...For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…
view full answer...The Superwinch Tiger Shark Off-Road Winch #W85NF that you referenced does not require installing an additional fuse as it has one built into it.
view full answer...For a winch like the Superwinch S6000 Winch #CU854754 you will simply want to use the Trailer and Vehicle Electric Winch Wiring Kit #BDW20207. Since winches can vary on how much they can pull this also affects how much power they need. For a winch…
view full answer...The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of insufficient gauge to allow enough power to pass through to run a trailer mounted winch. The main function of that circuit would be for lighter-duty…
view full answer...From what I was able to find, the Warn M12000 winch is 24.37" L. x 8.45" D. x 11" H. I've attached a picture with the dimensions on the Bulldog Winch Hitch Mounted Winch Plate #BDW20011 but since the mounting cradle is only…
view full answer...You would want to go with a deep cell battery. Having a battery larger than you would need would be the way to go as having a battery that is similarly rated as the draw of the winch will drain it quickly. We don't carry any deep cell batteries…
view full answer...The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500 Trailer…
view full answer...
What our customers are saying:
"very easy to shop"